Three-Layer Fully Automatic Drawer Magnetic Separator (Pneumatic Type)

1. Main Components

The system includes a magnetic grid, stainless steel housing, pneumatic actuator, automatic iron discharge components, and an anti-leakage mechanism. Optional accessories and custom configurations are available upon request.

2. Key Features

Automatic Iron Removal: Magnetic bars are pneumatically pulled out to remove magnetic impurities without manual contact. Manual/automatic modes available.
Efficient Material Handling: Material flows downward through magnetic grids. Magnetic powders and oxides are adsorbed on the sleeve wall and removed during pneumatic operation.
Leakage Prevention: Special sealing prevents material leakage due to internal pressure fluctuations.
24/7 Continuous Operation: Ideal for continuous use with no downtime during iron discharge.
Scalable Design: Units can be used in series or parallel to improve processing efficiency.
Customizable: Dimensions, magnetic strength, air pressure, and other parameters can be tailored to specific process requirements.

3. Working Principle

The magnetic grid movement and pneumatic pressure are adjustable to optimize iron removal and throughput. Upon pressing the “Start” button, the system automatically activates: magnetic rods move out of the material chamber via pneumatic cylinders and discharge collected iron particles. Manual override options are available for flexible control.

4. Technical Specifications

Input Voltage: AC 220V (customizable)
Magnetic Strength: Up to 14,000 Gauss on magnetic sleeve surface
Operating Temperature: Below 90°C (customizable)
Magnetic Grid: Three layers (5x6x5 rods), sleeve diameter 25mm
Air Supply Pressure: 0.65 Mpa standard; 0.3 Mpa for low iron content
Cleaning Frequency: Depends on iron content and processing rate; magnetic dust layer should not exceed 2mm
Working Pressure: Atmospheric (customizable)

Service

Free material testing is provided to offer design and customization solutions based on test results and work environment.